The control of valve is done via external solenoid valves or
mechanical valves. The supply of fluid is done via pressure
tanks or pumps.

These spray valves can be used for continuous or intermitted
employments. A special of the ASV is the separate regulation
of atomizing air for the cone holes. In this way the spray angle
can be regulated as needed from round spray to approx. 90°-
flatspray without changing the air cap. Optionally the regulation
of atomizing air for the cone holes can be done via second air
connection remote-controlled. The material connection with
thread 1/8“ achieves a high fluid flow. For fluid circulation an
additional thread 1/8” offers this alternative. If needed, this
thread can be equipped with an additional hose connection for

Another special of the ASV is an outlet in the fluid channel
which allows fluid exit in case of leakage effected by wear or
defect of needle gasket. This avoids fluid flow into the air
channel and inevitable soiling.

The special of sprayvalve ASV with quick release adapter is
the possibility to change the spray valve ASV within seconds
without disconnecting or dismantling the hoses for air and fluid.
Interruptions of work are reduced to a minimum. The quick
release adapter should be connected with the machine/robot.
Only by release one screw the complete spray valve can be
removed. The supply of air and fluid must be close off.

  • available nozzle dimensions:
    0,2 / 0,3 / 0,5 / 0,8 / 1,0 / 1,2 / 1,5 / 2,0 / 2,5 mm ø
  • continously adjustable regulation of spray jet from round- to flat spray
  • optionally remote-controlled regulation of spray jet from round- to flat spray
  • with ratchet regulator for easy adjusting amount of fluid.

Technical data:

max. 10 bar
3,5 – 6 bar
as required
approx. 50 x 40 x 72,5 mm
approx. 305 g
stainless steel
stainless steel
Special designs on request. Technical alterations reserved. For further information please contact us.

Download datasheet PDF