The round spray valves of series MMFS are designed for the application of colours (f.i. identification marks). Also they are suitable for spraying glues, adhesives, oils and release agents. Because of their low weight and the compact design the spray valves of series MMFS give the opportunity to install them with very low space requirements, f.i. in machines or robots.
The design of nozzle and air cap gives a very fine and small spray jet. The spray angle is approx. 10°.
The supply of atomizing air, control air and material is done via three hoses from the rear side of the valve. The closing plate on rear side can also be used as clamp.
Included to each valve is 1 m hose with connection screws for each function (atomizing air, control air, material).
- available nozzle dimensions:
ø 0.3 / 0.5 / 0.8 / 1.0 / 1.2 / 2.0 mm - Ratchet regulator for easy adjusting amount of fluid
- regulation of fluid outlet optional with counter nut adjustment
- Special designs for material pressure more than 4 bar
Technical data:
| Material pressure: | max. 4 bar |
| Control air pressure: | min. 5 bar |
| Atomizing air pressure: | as required |
| Measurements: | 118 x 15 x 50 (with clamp) |
| Weight: | approx. 275 g |
| Valve body: | brass, chemically nickel plated |
| Nozzle + needle: | stainless steel |
| Gaskets: |
Viton® (other materials on request) |
Special designs on request. Technical alterations reserved. For further information please contact us.